Sashco Symphony – Data Tech
Dilution/Stirring
Do not dilute. Stir thoroughly before using. Do not shake as this will cause foaming.
Application Methods
For best results, apply Symphony with a high-quality synthetic bristle brush. It may also be applied with a foam brush, pad applicator or spray applicator. Back brushing after spraying will enhance penetration in the wood surface. Brush material in the direction of the grain. Do not over-brush (bubbles can form). Sand between coats for a smoother finish.
Number of Coats
Apply two or more coats – additional coats will give a more durable finish, with higher gloss and more depth.
Dry Time
Symphony will dry to touch in one hour and can be sanded after two hours (when the air is warm & dry). Recoating can be done after 1-2 hours. Allow wood that will be handled to dry overnight before using. Actual dry time depends on thickness of coats, temperature and humidity.
Coverage
The first coat will cover 200-300 sq. ft./gal. (18-28 sq m/gal.). Average coverage rate after first coat is 400-500 sq. ft/gal. (37-46 sq. m/gal.). Porous wood will result in reduced coverage.
Room Conditions
Apply when 50-90 deg. F. Best results are obtained at 60-90 deg. F. Avoid applying in cold drafts or areas with no overhead roofs.
Freeze-Thaw Stability
Symphony may freeze if exposed to very low temperatures. If Symphony does freeze, store in a warm area until completely thawed and at room temperature before using. Tested through 5 freeze-thaw cycles.
Clean Up
Clean equipment and hands with soap and water. Spray equipment should be cleaned with water followed by cleaning paint thinner to clean dried material.
Storage
While freeze-thaw stable, it is best to store Symphony at a moderate temperature, between 60 deg. F and 80 deg. F. Store in tightly sealed containers. Cover the pails when not in use.
Limited Warranty
Sashco warants Symphony Clear Interior Log Coating to be free from defects. If Symphony is proved to be defective, Sashco will replace the product. Sashco’s sole responsibilty is set forth in this warranty. Neither the seller, nor Sashco, shall, in any way, be liable for incidental, indirect or consequental damages, including repair and reapplication labor. No other warranties are expressed or implied, including, but not limited to, any warranty of merchantablility or fitness for a particular purpose. Single-family residential use only.
TECHNICAL DATA:
(not to be considered specifications.)
Sheen Levels Gloss, Satin
Packaging: 1-gallon and 5-gallon plastic pails
VOC: Less than 350 g/l (2.8 lbs/gal)
Solvent Composition: Dipropylene glycol methyl ether, dipropylene glycol butyl ether, N-Methyl-2-pyrrolodone, ater and propylene glycol. (See MSDS)
Solids: 23%
Shelf Life: 18 months from date of manufacture.
pH: 8-9
Viscosity: 400-600 cps @ 60 rpm with #3 spindle.
Density: (wt/gal) 8-9 pounds/gallon.
Symphony is wonderful stuff. It is thick enough to keep you from having to back-brush. Other, thinner, interior sealants drip so much you have to keep going back and forth to catch all the drips – too much work. Symphony is one of the nicest products we’ve seen come from Sashco, and we’ll continue to use it on every home we stain.